Oil control valve solenoid

Technical questions and discussion

Moderator: Moderators

Oil control valve solenoid

Postby Nessa130490 » Thu Jun 21, 2018 9:58 am

Hello Team,

Most probably this has been asked before, but am not able to find it in the forum.
Am currently having an issue with OCV right bank (standing in front of the vehicle).
Basically it started with an engine stalling issue, then it escalated to a melted OCV wire. This in-turn burned the fuse.
Anyway, i unplugged the plug on the OCV and tried applying 12v as per other forums on the internet, and the solenoid kept clicking....

But after unplugging this "presumably" faulty OCV, my engine runs great now without any issues. But am not driving it at the moment, because am not sure on what effect it will have on my engine in the long run.

So going back on the main reason for this topic... How do you remove the OCV? Do i need to remove the engine cover?

Thanks in advance.
Mivec v6 fitted in a Lancer CK2

Signature image too big, please use a smaller one.
Nessa130490
 
Posts: 2
Joined: Mon Jun 11, 2018 5:42 am
Location: Seychelles

Re: Oil control valve solenoid

Postby Bernard » Thu Jun 21, 2018 11:21 pm

There's a few members on here that have great technical knowledge, I'm not one of them unfortunately.
I'm sure someone will help out though.

In the mean time, could you use a smaller signature image?
I've removed your current one for now.

Signatures

Signatures may contain up to three lines (one line being that displayed on a browser opened to 800 pixels width) of text (of small or normal size) and/or one image, valid combinations include; a single image of no more than 60 pixels high, 500 pixels wide and 6kB (6000 Bytes) in size. Signatures containing an image this large may also include one line of small size text. Signatures containing an image of 30 pixels high may include up to three lines of small size text or two lines of normal size text. Images of 15 pixels in height or less may allow up to three lines of normal size text or four lines of small size text. Animated images are not allowed.

Text sizes should be between 75% and 100% (small and normal). Text in signatures is subject to the same conditions as posts with respect decency, emoticons etc.

Links in signatures are permitted to a maximum of two unique pages or sites. You may not link to pirated software, porn or political, racist or other similar hate sites. Links are included in signature size limits. Users abusing these rules will be warned.
Image
User avatar
Bernard
Site Admin
Site Admin
 
Posts: 4074
Joined: Tue Oct 28, 2003 3:24 am
Location: Limerick


Return to FTO Technical

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

cron