Moderator: Moderators
By using the onboard accelerometer gMeter can measure forward and lateral g forces and use this data to compute acceleration, velocity, distance traveled, and engine power. gMeter is setup to compute performance for timed distance (1/4 mile or 400 meter), timed speed (0-60 mph or 0-100 km/h), or timed braking (60-0 mph or 100-0 km/h), and offers a hands-free automatic start feature (based on vehicle motion). gMeter also offers a full manual mode.
gMeter can display data and compute performance in US or metric units, and data from performance runs (including raw data in time series form) can be saved and e-mailed right from the device. Graphs of speed, distance, power, and forward/lateral g can be displayed, and saved to the photo album for later use or syncing to a computer. The software has two calibration modes, and offers a correction to account for vehicle pitch under acceleration and deceleration. Engine power computations include inputs for drivetrain loss, rolling resistance, aerodynamic drag, and weather conditions.
colm_mcm wrote:The FTOs only come with a basic G meter in the speedometer cluster, doesn't do any of the fancy stuff listed there.
gfalls wrote:colm_mcm wrote:The FTOs only come with a basic G meter in the speedometer cluster, doesn't do any of the fancy stuff listed there.
Yeah...Apparently it flashes "orange" on normal cornering, but push it a bit harder and it flashes red. Try it, see if you can make it flash red.. Only the select few have ever seen the red..
Return to General FTO Discussion
Users browsing this forum: No registered users and 4 guests