The Irish Mitsubishi FTO Owners Club

by **kevinod** » Thu Mar 20, 2008 1:58 am

When I lowered my car I put on camber adjusting bolts to get the camber right. This morning when I took the first couple of corners I noticed a bit of extra movement in the wheels, and then the steering wheel was slightly clockwise when going straight. Stopped and had a look, discovered the head of the driver side bolt sheared off! :shock:

Anyone see this happen before?

by **Bernard** » Thu Mar 20, 2008 8:59 am

Never saw that before but I have an unused set still in the box if you need them...

by **kevinod** » Thu Mar 20, 2008 11:17 am

Doh, ordered one off Ricerocket before I saw this... thanks though

by **Bernard** » Thu Mar 20, 2008 11:50 am

No problem, I'll hold onto them in case you break the next lot too :wink:

by **jpsautostyling** » Thu Mar 20, 2008 2:03 pm

iv not had that particular bolt shear off but when i had my punto a bolt that holds the wishbone sheared off but i put that down to clipping an awkward kerb!!

Facebook · by **gt94** » Fri Mar 21, 2008 1:04 am

Bernard wrote:Never saw that before but I have an unused set still in the box if you need them...

How much you looking for these i just fitted my new kyb shocks and apex springs could do with these

by **Bernard** » Fri Mar 21, 2008 4:11 am

They cost me £25 + P&P.
€25 would do the trick.

The Irish Mitsubishi FTO Owners Club

Sheared camber adjusting bolt

Sheared camber adjusting bolt

Who is online