ECU wiring GR 95 manual

Technical questions and discussion

Moderator: Moderators

ECU wiring GR 95 manual

Postby escu_calin » Thu Mar 04, 2010 3:28 pm

i searched all over the internet for a realistic wiring diagram of my Engine Ecu whioch holds the lambda sensor connection.. but found none! i also checked the wiring diagram.. slim and not help full
can i get your help ?
User avatar
escu_calin
FTO nut!
FTO nut!
 
Posts: 140
Joined: Tue Nov 03, 2009 8:26 am
Location: Cyprus

Re: ECU wiring GR 95 manual

Postby Dilogoat86 » Thu Mar 04, 2010 4:26 pm

What is it you want to do exactly? Follow the lambda sensor wire back into the loom and you should be able to find it that way.
Currently in my collection:
'98 Toyota Starlet...
'79 Mini Clubman 1380cc ~100BHP (I hope)
'79 BMW 728
Dilogoat86
I prefer my FTO to the missus
I prefer my FTO to the missus
 
Posts: 482
Joined: Fri Nov 20, 2009 3:14 pm

Re: ECU wiring GR 95 manual

Postby escu_calin » Fri Mar 05, 2010 9:48 am

Dilogoat86 wrote:What is it you want to do exactly? Follow the lambda sensor wire back into the loom and you should be able to find it that way.


how does this post help ?
can not follow because i don't want to dismantle my dash for a simple voltage measuring.

I will investigate by calling the wires in the ecu ;)
simply put;
i will disconnect completely the ecu ;
i will apply 2-3V to the lambda sensor signal wire ;
i will find its location by measuring all ECU incoming pins until voltage comes out and post results.
User avatar
escu_calin
FTO nut!
FTO nut!
 
Posts: 140
Joined: Tue Nov 03, 2009 8:26 am
Location: Cyprus

Re: ECU wiring GR 95 manual

Postby dpbayly » Sun Mar 21, 2010 2:30 am

hi mate i dont know if it exactly what your looking for but you can down load the fto workshop eletrical wiring manual here (http://www.ftooc.org/?section=workshop_manuals) you may need to register as a free member if your not already a member once you down load you will find the wiring diagram for the O2 sensor on pg 72 hope it helps.
dpbayly
1st gear
1st gear
 
Posts: 8
Joined: Sun Mar 21, 2010 1:09 am

Re: ECU wiring GR 95 manual

Postby escu_calin » Wed Mar 31, 2010 7:46 am

dpbayly wrote:hi mate i dont know if it exactly what your looking for but you can down load the fto workshop eletrical wiring manual here (http://www.ftooc.org/?section=workshop_manuals) you may need to register as a free member if your not already a member once you down load you will find the wiring diagram for the O2 sensor on pg 72 hope it helps.



thanks a bunch for the link but i tried to register on ftooc.. but no answer.. maybe my money arent good or i smell funny :smt068

i planned this week to lift the car and find old style where that ugly signal wire is entering the ecu
User avatar
escu_calin
FTO nut!
FTO nut!
 
Posts: 140
Joined: Tue Nov 03, 2009 8:26 am
Location: Cyprus

Re: ECU wiring GR 95 manual

Postby steelroe » Wed Mar 31, 2010 10:24 am

GR wiring is exactly the same as GPX aparts from MIVEC circuits. So download wiring diagram from this site and should sort you out.http://www.fto-ireland.com/forum/viewto ... f=1&t=9724

Alternator circuit will be diff too
User avatar
steelroe
Forever Ticking Over
Forever Ticking Over
 
Posts: 2206
Joined: Fri Feb 28, 2003 3:14 pm
Location: Kerry


Return to FTO Technical

Who is online

Users browsing this forum: No registered users and 6 guests

cron