Honda Civic SIR 1.5 Vetec?

Discuss other marques here

Moderator: Moderators

Honda Civic SIR 1.5 Vetec?

Postby Marie » Wed Jul 30, 2008 10:19 am

Needing peoples honest opinion on this car?

Be brutal!!! :?:

1.6 Guy's Sorry!
Last edited by Marie on Wed Jul 30, 2008 3:25 pm, edited 1 time in total.
When you're good, you're good....... but when you're great you're ME
User avatar
Marie
Nothing comes between me and my FTO
Nothing comes between me and my FTO
 
Posts: 644
Joined: Tue Sep 25, 2007 9:27 am
Location: Limerick

Postby Muad_dib77 » Wed Jul 30, 2008 1:15 pm

thought the SIR version was the 1.6 DOHC engine?
Image<->FTO-Ireland Shop
Tiomáint sé cosúil go bhfuil tú déanach i gcás maise!
User avatar
Muad_dib77
Moderator
Moderator
 
Posts: 5868
Joined: Fri Aug 26, 2005 3:35 pm
Location: Mr. Adam' back-yard.

Postby Mustang » Wed Jul 30, 2008 1:16 pm

I think it doesn't exist.
User avatar
Mustang
Forever Ticking Over
Forever Ticking Over
 
Posts: 2314
Joined: Tue Apr 27, 2004 10:39 am
Location: Clare / Laois

Postby colm_mcm » Wed Jul 30, 2008 1:39 pm

I'm pretty sure my friend has a 1.5 as opposed to 1.6 SIR saloon. that said, Google isn't throwing up any..


this may be useful?

Engines in the 1992-1995 Honda Civic were

1.5 L D15B7
1.5 L D15B8
1.5 L D15Z1
1.6 L D16Z6
1.6 L B16A1
1.6 L B16A2

eliminating the 1.6 Ls we have:

1.5 L D15B7
1.5 L D15B8
1.5 L D15Z1

looking at the details of each:

1.5 L D15B7
Displacement : 1493 cm³
Bore and Stroke : 75 mm X 84.5 mm
Compression : 9.2:1
Power : 102 hp (76 kW) @ 6200 rpm & 98 ft·lbf @ 3800 rpm
Valvetrain : SOHC (4 valves per cylinder)
Piston Code : PM3
Fuel Control : OBD-1 MPFI

1.5 L D15B8
Displacement : 1500 cm³
Bore and Stroke : 75 mm X 84.5 mm
Compression : 9.1:1
Power : 70 hp (52 kW) @ 4500 rpm & 83 ft·lbf @ 2800 rpm
Valvetrain : SOHC (2 valves per cylinder)
Fuel Control : OBD-1 MPFI

1.5 L D15Z1
Displacement : 1493 cm³
Bore and Stroke : 75 mm X 84.5 mm
Rod Length : 137 mm
Compression : 9.3:1
Power : 92 hp (69 kW) @ 5600 rpm & 97 ft·lbf @ 4800 rpm
Valvetrain : SOHC VTEC-E (4 valves per cylinder)
Piston Code : P07
Fuel Control : OBD-1 MPFI

therefore the only 1.5 L (w/ VTEC) engine from the 92-95 Civic was:

1.5 L D15Z1
Image
colm_mcm
Moderator
Moderator
 
Posts: 5991
Joined: Fri Nov 10, 2006 9:09 pm
Location: Location, Location

Postby Myfeckin FTO » Wed Jul 30, 2008 2:12 pm

Only 1.5 litre Vtec engine in the Civic I can think of is the 97 onwards 1.5LSI which had a 120bhp engine - this vtec was more for economy than performance - but it was a very good engine.

Still though - despite the fact its an excellent car - the Civic doesn't have a very good image these days - theres a lot of heads driving them around and they seem to be a bit of a cop magnet.
Image
User avatar
Myfeckin FTO
Forever Ticking Over
Forever Ticking Over
 
Posts: 5307
Joined: Wed Apr 28, 2004 2:19 am
Location: Clare/Limerick

Postby Marie » Wed Jul 30, 2008 3:22 pm

My other half has just bought one as a little project!!! :x
Was advertised on carzone but raging the add has been removed!
It's a 1994 1.6 saloon SIR for sure but I think he through in the word Vetec aswell, I can't be sure I stopped listing when I saw the heap of rust sitting in my drive-way?

Bearing in mind I was totally againt this project! Also the photo's in the advertised were NOT the photo's of the car he bought!!! Origionally there was a body kit on the car but that was removed before Andrew purched it, and there for there are now massive amount's of rust all over the body!
When you're good, you're good....... but when you're great you're ME
User avatar
Marie
Nothing comes between me and my FTO
Nothing comes between me and my FTO
 
Posts: 644
Joined: Tue Sep 25, 2007 9:27 am
Location: Limerick

Postby colm_mcm » Wed Jul 30, 2008 3:27 pm

just checked with my mate. it's a 1.6
Image
colm_mcm
Moderator
Moderator
 
Posts: 5991
Joined: Fri Nov 10, 2006 9:09 pm
Location: Location, Location

Postby Marie » Wed Jul 30, 2008 3:33 pm

http://www.carzone.ie/used-cars/Honda/C ... -V/801804/

Something onto this, but this is in way better nick then the one he bought!

Oh huge 18in alloy's on it also! You can not lock the wheel full way because they are rubbing. So they'll be fo sale pretty soon, Actually nice alloy's just not on this car.
When you're good, you're good....... but when you're great you're ME
User avatar
Marie
Nothing comes between me and my FTO
Nothing comes between me and my FTO
 
Posts: 644
Joined: Tue Sep 25, 2007 9:27 am
Location: Limerick

Postby CJ » Wed Jul 30, 2008 3:37 pm

Sounds like a nice buy :roll:

CJ
User avatar
CJ
Site Admin
Site Admin
 
Posts: 9083
Joined: Mon Feb 24, 2003 4:44 pm
Location: Dublin 15

Postby Marie » Wed Jul 30, 2008 3:47 pm

Ya it's just what's the word I'm looking for "LOVELY!" Like when someone get's a really bad haircut and you have to smile and say oh it's lovely!!!

People he's planning on getting this sprayed next week! The car is past it! I'm going to take picture's of it tomorrow to show how bad it is! He recon's he can order these http://cgi.ebay.ie/HONDA-CIVIC-WIDE-ARC ... dZViewItem to hide the rust!!!

The senser on the thermostat is also gone, and he managed to stab the rad yesterday when is was linging up the line's in the car for a respray! I saw actual tear's in his eye's but he refuses to admit it was a bad buy!!!

He's going to pure serious cash into this which granted is ok with me, as long as the engine is good!!"
When you're good, you're good....... but when you're great you're ME
User avatar
Marie
Nothing comes between me and my FTO
Nothing comes between me and my FTO
 
Posts: 644
Joined: Tue Sep 25, 2007 9:27 am
Location: Limerick

Postby gfalls » Wed Jul 30, 2008 4:13 pm

Hiding rust is always a false economy. Its still there, lurking underneath, eating away at the rest of the metal. :smt074

If his is a saloon (4 doors) then those wheel arches won't fit.. :wink:
User avatar
gfalls
My first-born will be christened 'MIVEC'
My first-born will be christened 'MIVEC'
 
Posts: 866
Joined: Tue Jun 24, 2008 8:15 pm
Location: Carlow

Postby TopCat » Wed Jul 30, 2008 4:44 pm

I'm all for project cars to dote over and bring back to health and restore (and generally eat your money in the mean time) and have great respect and admiration for those who do it.... but... you got start with something either in reasonable nick, or else something rare, and TBH, that ticks neither box for me. :roll:
User avatar
TopCat
Fight The Octopus!
Fight The Octopus!
 
Posts: 1560
Joined: Thu Feb 14, 2008 12:41 am
Location: Here be Monsters

Postby Marie » Wed Jul 30, 2008 4:46 pm

Yes Genius!!! Somebody give Gfall's a sweet!!! :lol: :lol: :lol:

Something onto those arches!!! :smt110
When you're good, you're good....... but when you're great you're ME
User avatar
Marie
Nothing comes between me and my FTO
Nothing comes between me and my FTO
 
Posts: 644
Joined: Tue Sep 25, 2007 9:27 am
Location: Limerick

Postby Marie » Wed Jul 30, 2008 4:47 pm

Marie wrote:Yes Genius!!! Somebody give Gfall's a sweet!!! :lol: :lol: :lol: And move him to the top of the class

Something onto those arches!!! :smt110
When you're good, you're good....... but when you're great you're ME
User avatar
Marie
Nothing comes between me and my FTO
Nothing comes between me and my FTO
 
Posts: 644
Joined: Tue Sep 25, 2007 9:27 am
Location: Limerick

Postby Myfeckin FTO » Wed Jul 30, 2008 6:11 pm

gfalls wrote:Hiding rust is always a false economy. Its still there, lurking underneath, eating away at the rest of the metal. :smt074

If his is a saloon (4 doors) then those wheel arches won't fit.. :wink:


Its actually a different model entirely!
Image
User avatar
Myfeckin FTO
Forever Ticking Over
Forever Ticking Over
 
Posts: 5307
Joined: Wed Apr 28, 2004 2:19 am
Location: Clare/Limerick


Return to Other Cars

Who is online

Users browsing this forum: No registered users and 3 guests

cron