gpx update

General FTO discussion only

Moderator: Moderators

gpx update

Postby ebrewer89 » Fri May 02, 2014 5:24 pm

Hi guys, after having my gpx resting for the last couple of months signed off the road i had really started to miss her.so today my new exeedy organic clutch has arrived, along with new inner cv cups :D so this means i can finally install get my fairly recently acquired rs short ratio gearbox and lightweight flywheel.while in the garage will also have a new timing belt,bearings and water pump.having this new running gear should transform the already amazing experience of driving such a well sorted car,and also give some added performance witch is never a bad thing :smt044 will keep you updated with results :smt023
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby brccrx » Fri May 02, 2014 8:07 pm

Cant wait to see it finished yet! Even doe its not mine hehe.

Keep us updated.
Only one ever build 1.3 turbo Fto, 0.7 bar on stock internals...because your imagination is the only boundary :)
User avatar
brccrx
FTO is my new religion
FTO is my new religion
 
Posts: 582
Joined: Thu Mar 14, 2013 10:07 pm
Location: Longford

Re: gpx update

Postby ebrewer89 » Tue May 06, 2014 2:37 pm

Off to the garage today.the wait starts now :lol:
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby ebrewer89 » Tue May 13, 2014 10:12 pm

Should have her back 2moro all going well..but..the mivec colt inner cv cups are 2 small for the gpx cv joints. :| so am needing now to get colt mivec cvs and hope they fit my drives or does anyone know if I can use hole colt shafts as that may be easier??
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby mivecrx » Tue May 13, 2014 11:23 pm

ebrewer89 wrote:Should have her back 2moro all going well..but..the mivec colt inner cv cups are 2 small for the gpx cv joints. :| so am needing now to get colt mivec cvs and hope they fit my drives or does anyone know if I can use hole colt shafts as that may be easier??


Mirage drives would be too short. Fto drives work if there 25 spline type, yours must be 27 spline.
mivecrx
Have you seen my FTO tattoo?
Have you seen my FTO tattoo?
 
Posts: 329
Joined: Thu Aug 09, 2012 3:03 am
Location: offaly

Re: gpx update

Postby ebrewer89 » Tue May 13, 2014 11:34 pm

So will the cv joints from the colt fit my fto drives?? :(
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby mivecrx » Wed May 14, 2014 12:01 am

ebrewer89 wrote:So will the cv joints from the colt fit my fto drives?? :(


I'm not 100% sure, I have a mirage cup on an fto drive in my car but it could be the 25 spline drive. I only found out there's different type fto drives.
mivecrx
Have you seen my FTO tattoo?
Have you seen my FTO tattoo?
 
Posts: 329
Joined: Thu Aug 09, 2012 3:03 am
Location: offaly

Re: gpx update

Postby ebrewer89 » Wed May 14, 2014 12:07 am

The guy doing the swap for me said that the cv joint from my drives are 2 big for the colt cups. so hoping that if I can get colt cvs they fill fit my drives, otherwise looks like new drives aswell.
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby mivecrx » Wed May 14, 2014 12:22 am

ebrewer89 wrote:The guy doing the swap for me said that the cv joint from my drives are 2 big for the colt cups. so hoping that if I can get colt cvs they fill fit my drives, otherwise looks like new drives aswell.



Count the splines on your drives, if 27 then the mirage cvs won't fit.
mivecrx
Have you seen my FTO tattoo?
Have you seen my FTO tattoo?
 
Posts: 329
Joined: Thu Aug 09, 2012 3:03 am
Location: offaly

Re: gpx update

Postby ebrewer89 » Wed May 14, 2014 12:37 am

Cool thanks,will find out tomorrow and go from there.do u have colt inner cvs or 25spline fto? Also if I have to change to 25 spline drives will the outer be the same and still fit my hubs?
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby brccrx » Wed May 14, 2014 1:43 am

Lad who have sold You the box should have mention that U will need different inner CV joints!

Have You 1.6 Flywheel and clutch too?
Only one ever build 1.3 turbo Fto, 0.7 bar on stock internals...because your imagination is the only boundary :)
User avatar
brccrx
FTO is my new religion
FTO is my new religion
 
Posts: 582
Joined: Thu Mar 14, 2013 10:07 pm
Location: Longford

Re: gpx update

Postby ebrewer89 » Wed May 14, 2014 11:08 am

Yes that would of been handy.yes have everything else I needed bar these cv joints.
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby ebrewer89 » Wed May 14, 2014 4:12 pm

Wel I bought hole lancer drives for the cv joints.cant make a mishmash of parts so does anyone have 25 spline fto shafts with outer cv joints for sale on here by any chance??? Dont need the cups just drive's and outer cv's.
Why did I have to have 27 spline shafts :smt021 I could be on the road now.more waiting it is.
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby ebrewer89 » Thu May 15, 2014 11:36 am

Are auto drives the same as manual? 25 spline auto drives should suit my setup I am presuming...
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby brccrx » Thu May 15, 2014 11:44 am

Yea all 25 drive shafts will suit, regardless is auto or manual.

Was Your old gearbox manual? Is it that bad?
Only one ever build 1.3 turbo Fto, 0.7 bar on stock internals...because your imagination is the only boundary :)
User avatar
brccrx
FTO is my new religion
FTO is my new religion
 
Posts: 582
Joined: Thu Mar 14, 2013 10:07 pm
Location: Longford

Re: gpx update

Postby ebrewer89 » Thu May 15, 2014 11:52 am

Perfect thanks.there is a breakers in dub that have an auto for breaking.another guy is breaking one on done deal but hasent been answering his phone the last 2 days :k my old gearbox had a very noisy clutch release bearing and would constantly pop out of fourth.got very anoying after awhile.would need a rebuild.
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby ebrewer89 » Thu May 15, 2014 12:24 pm

Just so everyone knows,I will be selling 2 27 spline driveshafts minus outer cvs.perfect clutch pressureplate and flywheel,the gearbox will need a rebuild as pops out of fourth but otherwise the sincros are fine.would all be good for a manual conversion for someone maybe?
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby brccrx » Thu May 15, 2014 12:41 pm

Price on clutch, pressure plate and the gearbox pls.

Also if thats 95 tip Mivec in dublin that has 27 splines cv joints.

Is your fto with ABS?
Only one ever build 1.3 turbo Fto, 0.7 bar on stock internals...because your imagination is the only boundary :)
User avatar
brccrx
FTO is my new religion
FTO is my new religion
 
Posts: 582
Joined: Thu Mar 14, 2013 10:07 pm
Location: Longford

Re: gpx update

Postby ebrewer89 » Thu May 15, 2014 1:04 pm

Damn thought that would be the case.Gerry on here might have something for me hopefully.no my fto doesent have abs,just the way I like it.i find abs tends to take away from driving.driver aids :r
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby brccrx » Fri May 16, 2014 11:14 pm

Check Your mail box there good news for You :)
Only one ever build 1.3 turbo Fto, 0.7 bar on stock internals...because your imagination is the only boundary :)
User avatar
brccrx
FTO is my new religion
FTO is my new religion
 
Posts: 582
Joined: Thu Mar 14, 2013 10:07 pm
Location: Longford

Re: gpx update

Postby ebrewer89 » Sat May 17, 2014 1:28 am

Thanks Seb yet another treat for my 4wheeled mistress :lol: all going wel she should be on the road by 9am,I will be sure to enlighten all on my experiance with the new goodies and possibly upload vid if I can work out how :smt003
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby Gerry » Sat May 17, 2014 7:11 am

Hi,
Did ya get those parts ok?
Guy collected them yesterday morning at 9.30am
Gerry
Have you seen my FTO tattoo?
Have you seen my FTO tattoo?
 
Posts: 362
Joined: Tue Jan 24, 2006 8:46 pm
Location: North County Dublin

Re: gpx update

Postby ebrewer89 » Sat May 17, 2014 11:59 am

Fuuuuuck!!!! Bad news im afraid guys my my mechanic is a retard an aparently cant count.tels me I have 27 spline drives, so I buy 25s obviously thinking as they have different inner splines an will fit the colt cv joints but noo.i already have 25 spline shafts so now I have 2 sets of 25 spline shafts that dont work. :smt021 .so now I no it is 27 spline shafts that connect to colt cv joints if I am not mistaken? :evil:
Anyone have any or willing to swap for a set of 25s?
This conversion cant really get much more agonising for such a simple job
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby ebrewer89 » Sun May 18, 2014 12:24 am

UPDATE:
Wow.just wow. thank you Seb! A lot of heartache was saved. She is now back on the road and better than ever.such an amazing difference the 1.6 rs box makes! :nwor the car is a different beast all together. Canot wait for dry wether were I can stop spining wheels and really get to grips with it.cannot recommend this modification enough to anyone considering it.just do it you will be amazed! :smt040
User avatar
ebrewer89
FTO nut!
FTO nut!
 
Posts: 113
Joined: Fri Mar 15, 2013 3:18 pm
Location: co.mayo

Re: gpx update

Postby brccrx » Sun May 18, 2014 1:05 am

Nice meeting/chatting to ya mate, your fto is absolutely savage, well now its even more lol
Only one ever build 1.3 turbo Fto, 0.7 bar on stock internals...because your imagination is the only boundary :)
User avatar
brccrx
FTO is my new religion
FTO is my new religion
 
Posts: 582
Joined: Thu Mar 14, 2013 10:07 pm
Location: Longford

Next

Return to General FTO Discussion

Who is online

Users browsing this forum: No registered users and 3 guests

cron