hello everyone

[funkygreendogs]

About time I introduced myself! Have my FTO a year now, but only now just starting to get into modding/repairs/maintance of it myself. Got new brake discs & pads from camskill, painted my brake callipers red and sprayed the alloys white. Car is going fine apart from some recently noticed rust on the rear brake disc on the drivers side... viewtopic.php?f=2&t=13807

Heres some pics







I hope to fit a 7" touch screen computer at some stage and get rid of that old factory installed radio which is just sitting there. Other than that I'll probably try and fit clear indicator bulbs if I get around to it and if i win the lotto I might get some cream leather interior! Any other suggestions for easy mods?

[goz_83]

flyeyes.co.uk and you can blacken all your lights. I would go for tinted black side light repeaters if i were you, rather than clear.

Looks like you're missing a couple of bolts, but you probably already know. What model is your fto?

[funkygreendogs]

nice one, yea ive seen a few with blacked out lights at the back would look savage.

Haha no I am not missing any bolts I took the pic when the paint was drying out, It took a couple of coats before I was finished with it

Its the GR 2.0 V6 non-mivec FTO but I still love her - Have wanted to get this car for years, used to pick this car back in the day playing Gran Turismo when I was a young lad. Was pretty tough to get it insured, no where seems to do it these days, I just persisted and after going through a few different phone operators my current insurer (quinn direct) finally agreed to insure me. Is that still the same set up? How much do you guys spend on insurance?

[goz_83]

The black tinted lights you. Normally see will be sprayed. The fly eyes are different and don't mess with the amount of light coming from the lenses. It's actually the same stuff they use on window advertising. From the outside, you see the advert and from the inside you see out via the tiny little holes. It's a cheap mod and easy to install, but I recommend waiting for a warm day. I have the fogs and indicators covered too.

[Dragonheart]

If its the same type of material as window tint and other window products I wouldn't install on a warm day!
Those type of things should be installed on a day with no sun, and no harm if theres a light mist. The area should be kept wet so the film can be moved around or adjusted if its not put on properly. If the area is hot the film will stick to it and the gluey substance on the inside will come off the back of it and stay on the area you're fitting it to if you try to peel it off. If you get bubbles or anything then its easy to readjust it once it'll come off easy. I've tinted windows before and put vinyl on cars for GAA matches and stuff and heat is not a good companion when doing it! Now if you get it first time great but I've never managed it first time no matter how small the item I was putting on.
So in other words don't install it on the 23rd of May or the 2nd of September....

[funkygreendogs]

Have any of ye guys put on underspray on the undercarrige for rust? Im worried now that the brake disc rusting could be the least of my worries. How much would that cost and where would be the best place somewhere around the west of ireland to get something like that done?

[Bernard]

Undersealing has been mentioned a few times, search is your friend

http://www.fto-ireland.com/forum/viewtopic.php?f=17&t=13122

[goz_83]

If its the same type of material as window tint and other window products I wouldn't install on a warm day!
Those type of things should be installed on a day with no sun, and no harm if theres a light mist. The area should be kept wet so the film can be moved around or adjusted if its not put on properly. If the area is hot the film will stick to it and the gluey substance on the inside will come off the back of it and stay on the area you're fitting it to if you try to peel it off. If you get bubbles or anything then its easy to readjust it once it'll come off easy. I've tinted windows before and put vinyl on cars for GAA matches and stuff and heat is not a good companion when doing it! Now if you get it first time great but I've never managed it first time no matter how small the item I was putting on.
So in other words don't install it on the 23rd of May or the 2nd of September....

The fly eyes material doesn't stick properly until a heat gun or dryer is gone over it a few times. You can take it off and fix it up. It doesn't form bubbles as the air just passes through the holes. It is hard to get it to stick in cold weather.

[Dragonheart]

Ah so its a totally different material then is it? Makes sense I suppose with the bubbles not forming cause of the holes in it, didn't think of that.

[goz_83]

They spray something onto it before they post it and they say it should applied as soon as possible, as the residue helps adhesion, or something to that effect.Its very easy to work with and would recommend it. One note of caution: upon removal (5 years later), it "could" remove the lacquer from some lights. That wouldn't bother me, because they can just be polished out anyway.