Page 1 of 1

Dell Motherboard

PostPosted: Tue Jul 27, 2004 10:34 pm
by steelroe
Any of you IT guys know where I can get a cheap Motherboard for a Dell pentium 4 machine. Equivalent from another manufacturer would also do.

Dell Board code M0321

Help Please

Rory

PostPosted: Wed Jul 28, 2004 10:09 am
by Viper
Try Dawn Computers (used to be www.dawncomputers.com but doesn't seem to work at the moment). They're based in Milltown/Dundrum and are uaually very cheap for PC components...

PostPosted: Wed Jul 28, 2004 3:35 pm
by Keith
you could also try

http://www.discount-computers-ni.co.uk/

They are the cheapest I've found so far even after shipping.
It usually arrives the next day too.

Most atx boards will fit the case

Not a great selection of p4 boards though,
there is also komplett.ie and jaguarcompsys.ie

PostPosted: Wed Jul 28, 2004 7:59 pm
by CJ
Depending on the design of the case, you might have a problem mating the board to the slots and screw holes. What model of Dell are you referring to?

CJ

PostPosted: Wed Jul 28, 2004 8:37 pm
by steelroe
Dimension 4550
But I can make another board fit

PostPosted: Wed Jul 28, 2004 11:44 pm
by CJ
If you're happy to do a bit of fabriacting then you should be fine ( I've done it a couple of times and the machine has worked fine but the back of it looked brutal after I'd hacked half the case away!). Try Scan in the UK or Komplett closer to home. This link on Dells site may be useful

CJ

PostPosted: Sun Jul 31, 2005 8:34 pm
by RussMan
Service Source in the Uk are dell's official apres warranty specialists ... have a look

PostPosted: Mon Aug 01, 2005 2:26 pm
by CJ
RussMan wrote:Service Source in the Uk are dell's official apres warranty specialists ... have a look


I'm guessing that Rory has managed to sort something out over the past 12 months ;)

CJ

PostPosted: Mon Aug 01, 2005 7:19 pm
by Myfeckin FTO
Good man Russman - I've done this a few times myself - reply to a thread from exactly a year ago and see if anyone notices - its good for a laugh! :lol: I'll have another go over the next few days for the craic!

PostPosted: Mon Aug 01, 2005 10:55 pm
by RussMan
Hmmmm how did that happen!!!! :oops:

PostPosted: Tue Aug 02, 2005 10:20 am
by CJ
Myfeckin FTO wrote:Good man Russman - I've done this a few times myself - reply to a thread from exactly a year ago and see if anyone notices - its good for a laugh!


G'wan outta that, trying to make it look like you never make mistakes ;)

CJ