fog lights

[ftolam13]

fog lights arent coming on. checked the fuses and bulbs, nothings blown.
when i press the fog lights button, the parking lights come on as normal but the fog lights won't. they were working grand before

[CJ]

Most likely the inards of the fog light switch has melted if bulbs and fuses are OK, common problem on the FTO. Prise the switch off the dash and take a look. Replacement can be got from the usual suspects....

Either that or the plug has simply become detatched at the rear of the switch.

CJ

[ftolam13]

changed the dial and it was all burned out, thanks for the help.

[gt94]

Don't mean to rob your post ftolam13 but while were on the subject of lights.My aftermarket dials stopped working the needle moves alright but they don't light up.One of my spot lights and one of my fog light bulbs are gone.I checked all fuses ok and checked was there power going and coming from the gauges with a multimeter and thats ok.Do you think the blown bulbs would have an effect on them ?

[Sebastian]

did you check the light bulbs ( 5 ) behind the dials ?

[gt94]

There like these ones http://www.mygarage-glasgow.co.uk/pages ... _white.JPG
dont think the bulbs would affect them cause they dont use them ( i think) there Full Lite Indiglo ones http://www.mygarage-glasgow.co.uk/pages ... ic_008.jpg

[ftolam13]

Don't mean to rob your post ftolam13 but while were on the subject of lights.My aftermarket dials stopped working the needle moves alright but they don't light up.One of my spot lights and one of my fog light bulbs are gone.I checked all fuses ok and checked was there power going and coming from the gauges with a multimeter and thats ok.Do you think the blown bulbs would have an effect on them ?

its ok work away i got my fogs workin so im happy,good luck with urs

[Muad_dib77]

There like these ones http://www.mygarage-glasgow.co.uk/pages ... _white.JPG
dont think the bulbs would affect them cause they dont use them ( i think) there Full Lite Indiglo ones http://www.mygarage-glasgow.co.uk/pages ... ic_008.jpg

I doubt the blown bulbs would affect them - they connect through an inverter - I'd say it's quite likely that it has burnt out. If possible try and messure voltage at a piont in the wireing between the dials..you will need to do some disassembly to get at it..