Oil leak

Technical questions and discussion

Moderator: Moderators

Oil leak

Postby CJ » Wed Jul 21, 2004 1:45 pm

I've an oil leak @ the back of the engine, it appears to be seeping down from above the head gasket. I havn't had an opportunity to get a good look underneath but the leak is coming from the rear bank above the head. I replaced the rocker cover gasket not so long ago so I know its not that. Anyone any ideas on the gasket required?

CJ
User avatar
CJ
Site Admin
Site Admin
 
Posts: 9083
Joined: Mon Feb 24, 2003 4:44 pm
Location: Dublin 15

Postby steelroe » Wed Jul 21, 2004 11:41 pm

CJ
I have the same problem since I bought my GPX, the oil on mine is leaking from between the top of the head and the bottom of the Camshaft block. Nothing major if yours is the same. The oil is visible around the altenator and down the back of the engine. I am going to repair this when i replace the back bank of plugs, some day soon. The seal used is tube gasket and the torque on the bolts is specified in the manuals
User avatar
steelroe
Forever Ticking Over
Forever Ticking Over
 
Posts: 2206
Joined: Fri Feb 28, 2003 3:14 pm
Location: Kerry

Postby CJ » Thu Jul 22, 2004 8:55 am

steelroe wrote: The seal used is tube gasket and the torque on the bolts is specified in the manuals


Nice one Rory, is tube gasket the correct term (sorry never heard of it :wink: ) As in your case, its not serious but my driveway is getting blacker by the day and the engine stinks after a hard run. I'm also concerned about oil geting on the belts. You only seem to be able to buy the entire gasket kit, do you know which of the gaskets below if the tube gasket?

CJ

Image
User avatar
CJ
Site Admin
Site Admin
 
Posts: 9083
Joined: Mon Feb 24, 2003 4:44 pm
Location: Dublin 15

Postby CJ » Wed Jul 28, 2004 8:08 pm

Just wondering did you get around to this Rory, if so, where did you pick up the gasket?

CJ
User avatar
CJ
Site Admin
Site Admin
 
Posts: 9083
Joined: Mon Feb 24, 2003 4:44 pm
Location: Dublin 15

Postby steelroe » Wed Jul 28, 2004 8:35 pm

I used WURTH black rtv instant gasket,
User avatar
steelroe
Forever Ticking Over
Forever Ticking Over
 
Posts: 2206
Joined: Fri Feb 28, 2003 3:14 pm
Location: Kerry

Postby CJ » Wed Jul 28, 2004 11:36 pm

steelroe wrote:I used WURTH black rtv instant gasket,


OK, so theres no prefabricated gasket as such, I assume this stuff can be picked up in the motor factors handy enough. Is it listed here by any chance?

CJ
User avatar
CJ
Site Admin
Site Admin
 
Posts: 9083
Joined: Mon Feb 24, 2003 4:44 pm
Location: Dublin 15


Return to FTO Technical

Who is online

Users browsing this forum: No registered users and 5 guests

cron