my rr day read out

[tin tin]

i went to a rr day last week and put the car up it wasnt bad considering the ecu is not mapped or the mivec isnt working



plus i still have the colt dials so itwas only taken to 6500rpm in 3rd what shoud it of been?

[Myfeckin FTO]

Presume thats 140BHP at the wheel rather than flywheel figure?
If so would put you on around 165-170bhp at the flywheel.
A standard mivec 2l V6 would be pushing out around 160-165 at the wheel or around 190-195bhp at the flywheel so I reckon you're around 30bhp down. You're also around 20Lb ft of torque down as well.

A healthy FTO Mivec will be reaching peak power circa 7600RPM.

[tin tin]

yeah it was at the wheel but my mivec isnt working or my ecu isnt mapped so its not at its full potential

[steelroe]

When you say the ECU is not mapped are you talking about the standard one or have you fitted aftermarket one. Dont think you can improve on the standard one. Would have to fit aftermarket.

[tin tin]

ive got a motec m800 ecu fitted i have no idea on the standerd 1 sorry