A few bits

[colm_mcm]

I don't need the speaker grilles anymore, sorted the rattles in the rear shelf over the course of 2 hours last night!

[mark]

the boy wonder

[Muad_dib77]

I don't need the speaker grilles anymore, sorted the rattles in the rear shelf over the course of 2 hours last night!

What did you do? Mine rattles like a rattly thing - cant seem to lock it down..A couple of my "poppers" have gone.

[Sebastian]

If Misinut doesn't take your front bump I may be interested if it's not cracked, let me know.
What new bumper have you now got on Seb?

bumper has a small damage on driver's side( see pic).
will load a propper picture with it ( it's not cracked all the way)

as for the new bumper .. still pre-facelift

[mark]

respect for the pre face lift!

[Sebastian]

respect for the pre face lift!

, if i would have bought a different one , i would probably had to buy side skirts .. at least .....+..


anyway if it sounds interesting i debadged it

[colm_mcm]

I don't need the speaker grilles anymore, sorted the rattles in the rear shelf over the course of 2 hours last night!

What did you do? Mine rattles like a rattly thing - cant seem to lock it down..A couple of my "poppers" have gone.

I have Fusion 6*9's in the back with tweeters that stick up to almost as high as the original grilles.

I got a block of foam and cable tied (!) it around the top part, so that there's pressure between the tweeter mount and the Mitsu speaker grille (not blocking the sound or anything) I mounted the speakers using double sided sticky foam tape and heavier bolts to eliminate any rattles from the metal shelf, I also packed foam behind the panel that covers the rear seat belts, as these are rattly, I also pop-riveted this panel and the parcel shelf in a few places as well as putting foam between anywhere where plastic and metal meet. The difference is huge, I can now turn the volume all the way up without hearing rattles from the back! I also took the opportunity to wrap the hooks the back seat hangs off (near the parcel shelf) in insulating tape to get rid of the occasional creaking the metal-on-metal causes.

I only did these jobs cos there are 3 people seeing the car! typical.

[Muad_dib77]

Sounds like a good solution

I'll try some foam - right after I get my exhaust sorted - again...

[Sebastian]

Bumper gone to Joe (Mitsinut)
sorry mark

[Sebastian]

Update

*pass side tail light . 2 small parts missing (pic), middle section a bit loose.
good for project. for FREE



*GR calipers/brake discs/pads (front ,back)- offers



*miror swich - free
*fto seat covers - free
*fto pasanger seat + subframe - 50 eur

[Muad_dib77]

I'd like that tail light - and the mirror switch

[TonyC]

Those front Calipers could come in handy for me. How much would they cost?

[Sebastian]

update
-tail light gone
-mirror switch gone
-back calipers gone


still available

*SUPERFLEX POLYURETHANE BUSHES
Front Bottom Arm - Front Bush
brand new ( ordered but never fitted)

http://camskill.co.uk/products.php?plid ... p364&z=148

camskill wants 65 eur delivered
will sell for 50 eur

*set of 4 standard springs ( after my APEX upgrade)
FREE

*front GR calipers
*seatcovers
*passanger side seat + subframe
50 eur

[ftolam13]

hav u got any pic of ur car now seb i would love to see it with all the new parts u got???????????

[Sebastian]

*pass side sidelight (small dammage , good for project, no bulbs ) - FREE


*fto pasanger seat + subframe - 50 euro


*Front Bottom Arm - Front Bush - 45 euro


**set of 4 standard springs ( after my upgrade) - FREE

[paul2508]

what seat coves have you got seb

[Sebastian]

they were standard ones(blue/red trim)paul but i dont have them anymore

[paul2508]

cool cool

[Sebastian]

Pioneer 6x9 - 30 EUR




TS-A6901

Frequency response 28 - 26.000 Hz
Sensitivity (1W/1m) 92 dB
Maximum Power 240 W
Nominal input power 40 W
Woofer size (cm) 23,7 x 16,3 cm
Woofer material IMPP Cone Woofer with Butyl Rubber Edge
Tweeter size (mm) 57,0 mm
Voice Coil bobbin type Glass Imide

[Sebastian]

update :

free stuff:
* pass side sidelight (small dammage , good for project, no bulbs )
* fto pasanger seat + subframe ( some bits might be missing )
* set of 4 standard springs ( after my upgrade) - FREE

others:
* Pioneer speakers 6x9 - 30 EUR
* Front Bottom Arm - Front Bush - 45 euro
* Dial Surround - Stainless Steel - 10 eur
* Dial rings - 35 eur

[Sebastian]

carbon fiber front strut brace good cond - 60 eur

[CJ]

Seb, I'll take the brace off you....

CJ

[gfalls]

Will strut fit a GX? I know the GX is different because of the ABS

[gfalls]

Seb, I'll take the brace off you....

CJ

One whole minute between posts...Grrrrrr..!

[Sebastian]

all stuff now gone.