Knocking Problem

[Anican]

Hello Im new to the forum and thought id say hi.

Anyway my can has developed a knocking noise when i turn the steering wheel 90 degress right, but when i straighten up then turn right again it does the same noise and knock, and sorry its the front Left side, I have replaced Shocks, Anti roll bar bushes, Droplinks, Tie rods and Track rod ends.
I have been reading some of the posts and some of you say that it could be the CV joint, i have looked at the boot and removed it and there are no cuts or holes and there is lots of grease in the joint.
Is there any way me finding out if it is the CV joint

Cheers All

Dan

[gfalls]

Certainly sounds like a CV joint. One on the wifes Mazda was making noise for years. Never got round to having it replaced though. Didn't make that much difference to driving it, but then, it was no FTO..

[optical illusion]

There could be minute wear you're not seeing on the boot.

Describe the noise in more detail.

[Anican]

it makes a donk noise (cant really discribe noise) then it is fine, but it happens neally every time i turn right. Its alot more noticable at slower speeds

[Gerry]

Most likely your cv joint, if it happens when you lock to the right, it is your passenger side cv joint that needs to be replaced and vice versa.

[Anican]

Only happens whdn I steer right but not on full lock but only turn the steering 1 quater of a turnr
Right

[optical illusion]

CV joint I'd say.

[Anican]

Do you know if it would be the inner or outer CV Joint

Cheers
Dan

[optical illusion]

As in what side? Whatever side you you turn into it's the opposite - like Gerry said.

[Anican]

I know it is the left side but there is a outer CV joint and a Inner CV joint, do you have an idea which 1 i should replace Cheers

[optical illusion]

Outer.